
Performance Optimized · Datasheet
Performance Optimized Wedge Sealed 10" Enclosure | Deaf Bonce Machete MS-10 Single 10" Sealed enclosure
- Net volume
- 0.88 cu ft
- Max mounting depth
- 5.59 in available, 5.09 in required by the driver
- Cutout
- 9.22 in
- External dimensions
- 24.93 in W × 13 in at the seat face H × 11.66 in at the base D
- Front baffle
- 1.5 in, double baffle
- Best For: Deaf Bonce Machete MS-10 Trunk-Fit Builds
- Net Volume: 0.88 cu ft (0.94 cu ft Gross)
- Alignment: Qtc 0.667 to 0.707, fc 54.1 to 55.4 Hz, F3 54.1 to 59.0 Hz
- Driver Match: Deaf Bonce Machete MS-10 (MS-10 D2 or MS-10 D4)
- Impedance: D2 4 ohms in series or 1 ohm in parallel; D4 8 ohms in series or 2 ohms in parallel
- Construction: Rear-Firing Wedge | V-Groove/Dado | Double 1.5" Baffle | Threaded Inserts
Technical specifications
| Specification | Value |
|---|---|
| Series | Proline X Performance Optimized Wedge |
| Compatible Driver | Deaf Bonce Machete MS-10, quantity 1. Direct fit |
| Configuration | Single 10 inch, single chamber sealed wedge |
| Mounting Position | Trunk or cargo area, tall face against the rear seat back |
| Firing Direction | Rearward into the trunk. Not a down fire design, no feet included |
| External Width | 24.93 in |
| External Height | 13 in at the seat face |
| External Depth | 11.66 in at the base, tapering to 6.93 in at the top |
| Internal Volume, Gross | 0.94 cu ft |
| Internal Volume, Net Acoustic | 0.88 cu ft |
| Alignment | Qtc 0.667 to 0.707, fc 54.1 to 55.4 Hz, F3 54.1 to 59.0 Hz anechoic |
| Driver Cutout | 9.22 in |
| Driver Mounting Depth | 5.59 in available, 5.09 in required by the driver |
| Frame Outer Diameter | 10.39 in, from the manual drawing |
| Driver Displacement (estimated) | 0.05 cu ft, not published by Deaf Bonce |
| Power Handling | 250 watts RMS |
| Impedance | D2 4 ohms in series or 1 ohm in parallel; D4 8 ohms in series or 2 ohms in parallel |
| Xmax | 10 mm one way |
| Sensitivity | 87.25 / 88.06 dB as published by Deaf Bonce |
| Material | Langboard Elite MDF |
| Construction | CNC cut, V-groove and dado joinery |
| Panel Thickness | 0.75 in |
| Front Baffle | 1.5 in, double baffle |
| Internal Bracing | Internal brace |
| Driver Mounting | Threaded inserts at every mounting location, stainless machine screws included |
| Terminal Cups | One Proline X ABS and carbon fiber composite, side mounted, pre wired 12 gauge OFC |
| Damping | Light polyfill wall lining, does not alter acoustic volume |
| Carpet | Plush black |
| Weight | 30.9 lb |
| Warranty | 1 Year Limited |
| Built In | Tullahoma, Tennessee |
Installer's take
0.88 cubic feet net. That is the Butterworth volume for the MS-10 D2 coil, computed from Deaf Bonce's published Fs, Qts and Vas. Deaf Bonce publish no sealed recommendation for the MS-10 (their manual recommends a bass-reflex box), so this alignment is ours, chosen for damping and transient control rather than peak output. Half power lands at 54.1 to 59.0 Hz anechoic, before any cabin gain.
Two coil versions, one cabinet. In this box the MS-10 D2 lands at Qtc 0.707, maximally flat, the reference musical alignment, and the MS-10 D4 at Qtc 0.667. System resonance sits at 54.1 to 55.4 Hz.
The cosmetic recess is cut to the 10.39 in frame diameter read from the dimension drawing in Deaf Bonce's manual. Deaf Bonce do not publish driver displacement; the 0.05 cu ft carried here is an estimate for a 10 inch motor, and only the gross figure depends on it.
Measure the base depth. This cabinet is 11.66 inches deep at the trunk floor, 6.93 at the top, and 24.93 wide.
Questions
Will this enclosure fit both the MS-10 D2 and the MS-10 D4?
Yes. The coil versions share a frame, the same 9.22 in cutout and the same 5.09 in mounting depth, so the cabinet fits either. They differ electrically, and nothing about the enclosure changes.
Why 0.88 cubic feet net?
0.88 cubic feet net. That is the Butterworth volume for the MS-10 D2 coil, computed from Deaf Bonce's published Fs, Qts and Vas. Deaf Bonce publish no sealed recommendation for the MS-10 (their manual recommends a bass-reflex box), so this alignment is ours, chosen for damping and transient control rather than peak output. In this box the MS-10 D2 lands at Qtc 0.707, maximally flat, the reference musical alignment, and the MS-10 D4 at Qtc 0.667. System resonance sits at 54.1 to 55.4 Hz. The box is 0.94 cu ft gross before the driver's displacement. Deaf Bonce do not publish driver displacement; the 0.05 cu ft carried here is an estimate for a 10 inch motor, and only the gross figure depends on it.
What amplifier power should I run, and what impedance?
Deaf Bonce rate the MS-10 at 250 watts RMS. The MS-10 D2 carries two 2 ohm coils: 4 ohms in series or 1 ohm in parallel. The MS-10 D4 carries two 4 ohm coils: 8 ohms in series or 2 ohms in parallel. Run the coils in series unless the amplifier is rated stable at the parallel load; 1 ohm is beyond most amplifiers. Aim for roughly 175 to 250 watts at the impedance you wire.
How does a wedge enclosure improve the sound in a trunk installation?
The angled seat-side face matches the roughly 20 degree lean of a factory rear seat, so the cabinet sits flat against it instead of leaving a wasted triangle. The vertical trunk-lid-side face carries the driver, firing rearward into the trunk cavity.
Why a rear-firing wedge instead of a plain box?
A rectangular box of this volume wastes the triangle of space a leaning rear seat creates, and firing into the trunk lid rather than at the seat back gives the cabin a smoother path to the passengers. The wedge takes the same air volume and puts it where the car actually has room.
What is the expected low-frequency extension?
Half power lands at 54.1 to 59.0 Hz anechoic, before any cabin gain. Qtc is 0.667 to 0.707. These figures exclude cabin gain, which in most vehicles adds real output below 40 Hz. Deaf Bonce publish the MS-10's free-air resonance at 34.9 to 35.2 Hz.
Do I need to add polyfill or damping?
No. Polyfill is already installed as a light wall lining and the quantity is chosen so it does not change the acoustic volume. Do not add more.
Is the driver included?
No. This is an enclosure only. You receive the cabinet finished in plush black carpet, with threaded inserts at the driver position, stainless machine screws, one side-mounted pre-wired terminal cup and the polyfill lining already installed.
Other Performance Optimized models
- Alpine R2-W10 Dual 10" Sealed
- Alpine RSW10 Dual 10" Sealed
- Alpine S2-W10 Dual 10" Sealed
- Arc Audio SW10 Dual 10" Sealed
- Audiofrog GB10 Dual 10" Sealed
- Audiofrog GB10 Dual 10" Sealed
- Audiomobile GT2 Dual 10" Sealed
- Diamond Audio DMD-SH Dual 10" Sealed